ADE-III Cable Identification Instrument

1)ADE-III Cable Detector 2)Used for cable identification 3)Identify target cable among multi-core cables 4)Easy to use

  

Cable Detector ADE-III

Introduction

Cable Identification Instrument ADE-III is designed to identify single and multi-core cables, which is easy to use and robust. ADE-III is a daily using tool for cable maintenance workers.

  

ADE-III comprises a current pulse generator, a receiver and connecting tongs and cables. When it works, the generator sends a series of pulses with a peak value of 65A into the cable to be identified. This creates a magnetic field around the target cable, and use the coupling clips to induce. Then the pulse direction and current flow will be shown on the receiver, so that the operator can identify the cable safely and reliably. Arrow indication will be shown on the clips, the green LED will light when the direction of the arrow is as same as the pulse current of generator, it means the cable is which carries pulse current. In contrast, it isn’t the cable when the red LED lights.

Technical Data

Generator

Pulse voltage	40V
Pulse peak current	65A
Pulse sequence 1	15/min
Pulse sequence 2	30/min
Power supply 1	220V,50Hz Mains
Power supply 2	12V rechargeable battery pack
Operating time	3-6 h
Charging time	1.5-5 h
Dimensions	L 300mm×D 100mm× H 200mm
Weight	6.0kg

Identification Receiver

Modes of operation	active, passive, battery checking, shutdown
Gain level	5 level
Indication	analogue meter
Interference Suppression	multiple
Alarm	LED indication,piezoelectricity acoustic alarm beeper
Power supply	6V rechargeable battery pack
Operating time	30 h(active mode)
Dimensions	L 210mm× D 100mm× H 50mm
Weight	0.6kg

Identification tong

Insulation voltage	1kV
Dimensions	150×100mm
Weight	0.75kg

ADE-III Cable Identification Instrument